|
|
|
|
Pool Heat Pumps
in Canada
We have
hundreds of successfully installed pool heat pumps in Canada.
For Canada, we use USA and Canadian pool heat pump manufacturers
that have passed our test for reliability and efficiency. The
ones we recommend for Canada have the best warranties.
Gas is too
expensive in Canada to heat up a pool and solar systems have
been disappointing due to weather conditions.
Heat Siphon
is our favorite pool heat pump brand for Canada due to the long
warranty and also that it heats to lower outside air
temperatures without a hot gas defrost system. We also like
Jandy, Solarium, Hayward and TDM Nirvana. If you are looking for an
specific brand that we don't have listed, please call or write
to us for pricing.
Please
note:
If you entered our website through this page, the menu on the
left will help you navigate for more heat pump information, or
click here to go to our Index Page.
|
 |
Special Shipping Offer to our Friends in Canada!
Take advantage of an incredible delivery offer for a limited
time only.
Have your heat pump delivered at your home in Canada with a lift
gate truck that will lower the heater to the ground for you.
Broker fees paid, GST taxes paid, PST taxes paid. 100% insured
delivery with no claims to fill up.
All you have to do is sign and accept your pool heat pump.
Residential Delivery in
Canada.......................................$695.00
Offer expires on 11/21/08
In Canada we can also ship to a truck terminal in your
city for a lower rate (doesn't include Broker fees or Taxes) or
to the closest USA terminal to you for free. Please call us to
find out more. |
Below are our recommendations
for Canada. Please click on the logo for more information on each
product:
 |
 |
|
Manufacturer's Canada Warranty:
2 years labor, 5 years parts, 10
years on the compressor, 10 years on the titanium heat
exchanger. |
| |
|
|
|
 |
|
Manufacturer's Canada Warranty:
2 years parts and labor, 5 years on the compressor
and lifetime on the heat exchanger |
| |
|
|
|
 |
 |
|
Manufacturer's Canada Warranty:
1 year parts & labor. Lifetime on the heat
exchanger |
| |
|
|
|
 |
 |
|
Manufacturer's Canada Warranty:
2 years parts & labor. 5 on the compressor and Lifetime on the heat
exchanger |
| |
|
|
|
 |
|
|
Manufacturer's Canada Warranty:
1 year parts. Lifetime on the heat
exchanger |
| |
|
|
|
 |
 |
|
Manufacturer's Canada Warranty:
1 year parts & labor and 5 on the
compressor. |
 |
 |
|
Manufacturer's Canada Warranty:
1 year parts & labor and 5 on the
compressor. |
Customer Testimonial Letters:
 May
2008, BC Canada |
Hi Jason:
I wanted to let you know I have received the Heat Siphon and had
it professionally installed last week. My main hesitation prior
to ordering was the noise it may cause. My experience with
house heat pumps was that they seemed excessively noisy. As you
explained by phone, the Heat Siphon is relatively quiet with the
Scroll compressor. I may not have to put in any hedges or other
sound dampening measures as I had anticipated. My neighbors
have indicated the noise does not bother them either, so all
went according to plan.
The pump works just as I had imagined. I have a 18X36 sized
pool I keep it covered with a solar cover. Air Temperature when
I started up was 60 F and the Pool temp was 66 F at 9 pm on
Tuesday. By 9 pm Wed, the pool was 75 F and air temp was 60 F.
By Thursday morning at 7 am the pool was 79 F .....and by that
evening I was looking at 82 F. Over the week-end I only had to
run it only once by the day to maintain the temperature in the
low 80s ( weather has gotten much better). It hasn't been below
80 F for over a week which is the first time in 13 years. We
have been using the pool more in the last week than all of the
last 2 years.
Thanks again for all your help
Peter
seaoter@telus.net
May 2008, Heat Siphon SX5.0,
Vancouver Island, BC, Canada
Peter's pictures of his Heat Siphon SX5.0 Installed at his home
in BC, Canada:
 |
Close up of Heat Siphon after
installation. Notice the four patio stones that he used
as a base. This is a simple and inexpensive, but
effective base for the heat pump that avoids the cost
and time spent pouring a concrete slab. |
| |
|
 |
View of the heat pump outside of the pool equipment
room. The heat pump needs to be outside to get the
highest efficiency. |
| |
|
 |
View of the inside of the pool equipment house. Notice
the straight pipes and pride of workmanship. |
|
June
2008, New Brunswick, Canada |
Guy purchases his heat pump from us in 2005. This is the original email
that we received from him:
Good
morning Marcus,
I received the heat pump yesterday, everything is fine, I'm going to store
it in my garage for the winter and then install it in the spring. I'll
keep you posted on how that goes and maybe send some pictures as well.
Again I thank you very much for all your help with my order from the
selection of the unit to the delivery. If anyone is looking for a heat
pump I'll be sure to send them your way. This was the first major
purchase I made over the internet from the United States and between my
customs brokers and you the transaction and delivery went flawlessly.
Guy
guy.richard@rogers.com
Heat Siphon HP5.0, New Brunswick, Canada
On June 2008, we received another email from him with some pictures
and an update:
Hello Marcus, I purchased my heat pump from you a few year ago and
finally got some pictures taken of the pool. I thought I would send
some. We're starting our third season with the pool and the heater is
worth every cent. I started the heat pump and within 48 hours the water
went from the low 60s to 84 degrees, something my pool guy told me it
would take 3 to 4 days. Anyway just thought I would update you and tell
you how pleased we are with your products and service.
Guy
guy.richard@rogers.com
Want to read more testimonials? Click here to access our Customer
Testimonial Page
|
